Troubleshooting; Technical Data - Vitalmaxx 1006 Mode D'emploi

EN

Troubleshooting

If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the cus-
tomer service department.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does not
work.
No heat is produced.
The device gets too
warm.
The device makes
noises.
Smoke emerges from
the device.

Technical Data

Article number:
Model number:
Timer:
Voltage supply:
Power:
Protection class:
Mains adapter
Model number:
Input:
Output:
Protection class:
16
Possible cause / solution
• Has the ON/OFF button (8) been pressed properly?
• Is the mains adapter inserted in the plug socket?
• Is the socket defective? Try another one.
• Check the fuse of the mains connection.
• Is the connecting cable connected correctly to the mains
cable of the mains adapter?
• The device has switched off automatically after operating
for 15 minutes. Press the ON / OFF button again.
• There is too much weight on the device.
• Has the heat function (11) been switched on?
• Was it in operation several times in succession for 15 min-
utes / too long in each case? Pull the mains adapter out of
the plug socket and allow the device to cool down. Always
disconnect the device from the mains when it is not in use.
• Operating noises are a normal consequence of the me-
chanics and not a defect.
• Pull the mains adapter out of the plug socket immediately
and contact the customer service department.
06799
1006
15 minutes
100 – 240 V ~ 50 Hz
max. 24 W
III
XH1200-1500LG
100 – 240 V ~ 50 / 60 Hz, 0.5 A
12 V DC, 1.5 A
II
Customer Service /
Importer:
DS Produkte GmbH
Am Heisterbusch 1,
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls to German landlines
are subject to charges.
The cost varies depending
on the service provider)
All rights reserved.