Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
3.
Loosely install extension column (not included) to CPA395
using two 5/16-18 x 1" hex head self-tapping screws (B),
two 5/16" split lock washers (C) and two 5/16" flat washers
(D) through fastener hole in CPA395 into first hole on each
side of extension column. (See Figure 3)
3
(B) x 2
(D) x 2
First hole in
extension
column
Figure 3
4.
Finish loosely securing extension column to CPA395 using
two 5/16-18 x 1" hex head self-tapping screws (B), two 5/16"
split lock washers (C) and two 5/16" flat washers (D)
through adjustment slot in CPA395 and into third hole on
extension column. (See Figure 4)
4
(B) x 2
5
Figure 4
(C) x 2
(A)
Extension column
(not included)
(C) x 2
(D) x 2
Adjustment
slot
5
5.
Adjust extension column to desired angle. (See Figure 4)
6.
Tighten hardware installed in Steps 3 and 4.
7.
Complete installation following mount installation
instructions.
CPA395
5
Publicité
Table des Matières
