Using The Clamp - POWER SMITH PLCL10BC Manuel D'utilisation

OPERATION
The Adjustable Base provides a solid support for the tool.
When the tool is mounted to the Base, position the tool so
the laser lines are projected close to the desired height.
Use the Height Adjustment Knob (11) to bring the laser line
to the exact height desired.

USInG THE CLAMP

The tool kit also comes with a metal Clamp (12). It attaches
to different objects with a thickness up to 2" (50mm).
The Clamp has two pivots allowing its attachment to be
positioned at any angle.
Attach the tool to the Clamp by threading the 1/4" screw
into the bottom of the tool.
You may use the Adjustable Base and the Clamp together
to add more versatility. Connect the Clamp and the
Adjustable Base by threading the 1/4" screw into the
bottom of the Adjustable Base. See figure 2.
MOUnTInG TO A TRIPOD (FIG 3)
A tripod (not incuded) provides a stable, height-adjustable
support. Attach the tool to a tripod by threading the 1/4"
screw into the bottom of the tool. See figure 3.
APPLICATIONS
CHECkInG ALIGnMEnT (FIG 4)
The tool can be held against the wall to check the
alignment. For leveling horizontal and vertical alignment,
activate the tool to self-leveling mode and make sure the
Leveling Indicator is green.
ALIGnMEnT ABOVE THE MAXIMUM
TRIPOD HEIGTH (FIG 5)
Project a level horizontal line. Measure up at two points
from the line to create a second parallel line.
InSTALLInG WALL TILE (FIG 6)
Determine the height at which you want the first row of tile
to begin. Align the intersection of the crossed horizontal
and vertical laser lines at that location. Install the first tile
so it aligns with both the horizontal and vertical laser lines.
Continue installing the tile along either the horizontal or
vertical laser line.
English
WARnInG:
cleaning the lens. Serious injury to eyes could result.
• Keep the laser lens clean. A dirty lens will affect the
laser beam operation. Clean the lens with a moist
cotton swab. Clothes with nylon content could scratch
the lens causing the laser to operate incorrectly.
• Clean the tool housing with a moist cotton cloth.
Use only water. Do Not use cleaners, solvents or
compressed air to clean the tool.
• Never immerse or let liquid get inside the tool.
• Dry the tool with a cotton lint free cloth and allow to dry
completely before using or storing the tool.
This product is warranted free from defects in material and
workmanship for 2 (Two) years after date of purchase. This
limited warranty does not cover normal wear and tear or
damage from neglect or accident. The original purchaser
is covered by this warranty and it is not transferable. Prior
to returning your product to store location of purchase,
please call the Toll-Free Help Line for possible solutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT
COVERED BY THE 2 YEAR WARRANTY.
For questions about this or any other PowerSmith™
product,
Please call Toll-Free:
Or visit our website:
www.p
owersmithproducts.com
6
mAINTENANCE
Do not turn the laser on while
wARRANTy
HELP LINE
888-552-8665.