Using The Scales - Proficook PC-KW 1061 Mode D'emploi

CAUTION:
• Batteries are not to be disposed of together
with domestic wastes. Dispose of the used
batteries at the relevant collection bin or at
your dealer's.
NOTE:
The display showing "Lo" indicates that batteries
must be replaced.
• The battery compartment is located on the
bottom of the scale.
• The batteries are protected by a plastic foil.
• Remove this plastic foil.

Using the Scales

The kitchen balance was developed to display the
weight of food and ingredients.
Display Indication
88888 Self test
Ready to weigh
0 Zero balance
kg Kilogram
g
Gram
lb American pound
oz
British ounce
Lo Battery Low
EEEEE Overload
Un St
Not standing on a stable surface
Switching On
1. Place the scales on a flat, smooth surface.
2. Press the ON/OFF button.
All segments are briefly illuminated in the
display followed by "
Weighing
1. Use the UNIT button to select the desired unit
of measurement: "g", "kg", "lb" or "oz".
2. Wait for the symbol to indicate that the
scale is ready to measure.
20
3. Place the goods on the scale plate centered as
4. When the
5. You may then read off the measurement.
Tare Function
If you would like to add a further ingredient to the
first ingredient and then weigh it:
• Press the TARE button briefly.
• The scales are reset to "0". Wait for the
• If you now place further ingredients on the
Switching Off
If you want to turn off the scale earlier, press and
hold the ON/OFF button for approx. 3 seconds.
Periods of non-usage
If you do not use the appliance for a longer period
of time, remove the batteries in order to prevent
"leakage" of battery acid.
0 ".
• Clean the device with a slightly moist cloth.
• Dry the device well after cleaning with a dry
far as possible.
symbol appears, the measure-
ment has been completed.
symbol to indicate that the scale is ready to
measure.
scales their weight is displayed.
NOTE:
With the automatic switch-off the scales turn off
automatically after approximately 120 seconds.
Cleaning
CAUTION:
• Do not immerse the appliance in water: the
electronic components can be damaged.
• Do not use a wire brush or any abrasive
items.
• Do not use any acidic or abrasive detergents.
Make sure that no humidity or waters seeps
into the device!
and soft cloth.