Arktic 271773 Mode D'emploi page 9

Maintenance
• Check the power cord for any damage from time
to time to avoid electric shock. Never operate the
appliance when the power cord is damaged. A
damaged power cord must be immediately by a
qualified and authorized technician.
Troubleshooting
If the appliance does not function properly, please check the below table for solution. If you are still unable to
solve the problem, please contact the supplier/service provider.
Problems
Appliance has no function.
Compressor does not work.
Compressor works, but no
ice cube is made.
indicator is on.
Technical specification
Item no.
Operating voltage & frequency
Rated input power
Rated current
Refrigerant used and quantity
Climate class
Protection class
Noise level
Ice making capacity
Ice tank storage
Net weight
Dimension
Remark: Technical specification is subjected to change without prior notification.
• Only a qualified technician and original spare
Possible causes
• Appliance is switched OFF.
• Not connected properly with the
electrical supply.
• Water shortage from the water
supply system.
• Container is full of ice.
• Refrigerant leakage
• The refrigerating system is blocked.
• Water shortage from the water
supply system.
• Water valve is damaged.
• Tap water pressure is too slow.
271773
241W
1,65A
R290 / 65g
26 kg / 24 hr
31 kg
parts and accessories should be used to carry
out the repair and maintenance work. DO NOT
attempt to repair the appliance yourself.
Possible solution
• Switch ON the appliance.
• Check the connection with
electrical supply.
• Check the water supply system.
If ok, restart the appliance.
• Take out some ice.
• Contact the supplier.
• Check the water supply system.
If ok, restart the appliance.
• Contact the supplier to replace
the water valve.
• Be sure the tap water pressure
is at least 1kg/cm
220-240V~ 50/60Hz
N (16°C to 32°C)
Class I
< 60 dB (A)
7 kg
398 x 546 x (H) 682 mm
2
271780
293W
1,85A
R290 / 85g
50 kg / 24 hr
33 kg
9
EN