Beware Of Condensation; Cleaning The Unit; Bluetooth® Overview; Transmission Conditions - Tascam VL-S3BT Mode D'emploi

calls or send or receive signals. If this occurs,
increase the distance between this unit and
those devices or turn them off.

Beware of condensation

If the unit is moved from a cold to a warm place,
or used after a sudden temperature change, there
is a danger of condensation; vapor in the air could
condense on the internal mechanism, making correct
operation impossible. To prevent this, or if this occurs,
let the unit sit for one or two hours at the new room
temperature before using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not
wipe with chemical cleaning cloths, thinner, alcohol
or other chemical agents. Doing so could damage the
surface or cause discoloration.
Bluetooth® overview
This unit has a built-in Bluetooth audio receiver,
allowing it to output the audio playback of a
computer or portable audio device that supports
Bluetooth.
CAUTION
Operation and connection of this unit's
Bluetooth functions with all Bluetooth devices
are not guaranteed.

Transmission conditions

This is a Class 2 Bluetooth transmission output device.
It has an approximate transmission range of 10 m,
but this distance can vary due to the interference of
obstacles and electromagnetic waves.
An obstacle between this unit and another Bluetooth
device could interfere with Bluetooth transmission. If
this occurs, remove the obstacle. Moreover, the use of
a wireless LAN (IEEE802.11b/g) or microwave oven in
the same operating environment could also interfere
with Bluetooth transmission. If this occurs, stop using
that equipment or move this unit and the Bluetooth
device at least 10 m away from it.

Profiles

This unit supports the following Bluetooth profile.
• A2DP (Advanced Audio Distribution Profile)
Bluetooth devices must support A2DP in order to
transmit audio via Bluetooth.
Even if they have the same Bluetooth profile,
however, different Bluetooth devices can have
different functions depending on their specifications.

Codecs

This unit supports the following A2DP codecs and
automatically selects one of them during audio
transmission.
• SBC
• AAC
• aptX
It will select the appropriate codec to use according
to the codec support of the Bluetooth device and
transmission conditions.
NOTE
You cannot use buttons, for example, to select
the codec.
Due to the nature of Bluetooth wireless
technology, playback from this unit will start
slightly later than when triggered from the
Bluetooth device.

Content protection

This unit supports SCMS-T content protection
during audio transmission, enabling the playback of
protected audio.

Transmission security

This unit supports security functions during
Bluetooth transmission according to the Bluetooth
standards, but the invisibility of transmission is not
guaranteed.
Our company will take absolutely no responsibility if
data is leaked during Bluetooth transmission.

Using the TEAC Global Site

You can download this Owner's Manual necessary for
this unit from the TEAC Global Site (http://teac-global.
com/).
1. Open the TEAC Global Site (http://teac-global.
com/).
2. In the TASCAM Downloads section, click the
desired language to open the Downloads
website page for that language.
7
TASCAM VL-S3BT