Error Codes - Aqualytic AL250 Mode D'emploi

Error codes

GB
E 01
E 10 / E 11
E 20 /E 21
E 22
E 70
E 71
E 72
E 73
E 74
E 75
E 76
E 77
E 78
E 79
38
Error codes
Light absorption too great. Reasons: e.g. dirty optics.
Calibration factor "out of range"
Too much light reaching the detector.
Battery capacity was too low during measurement. Change battery.
CL: Factory calibration incorrect / erase
CL: User calibration incorrect / erase
pH: Factory calibration incorrect / erase
pH: User calibration incorrect / erase
CyA: Factory calibration incorrect / erase
CyA: User calibration incorrect / erase
S:4.3: Factory calibration incorrect / erase
S:4.3: User calibration incorrect / erase
CaH: Factory calibration incorrect / erase
CaH: User calibration incorrect / erase
AL250_Cl-pH-CyA-S:4.3-CaH_2a 11/2012