MGTS AC010140 Manuel D'utilisation page 52

OPERATION
Inflating a car tire and bicycle tire
1. Roll out the 12V cord and connect the 12V adaptor to the
vehicle's outlet.
2. Screw the thread connector onto tire's valve stem.
3. Operate air compressor by press compressor switch until the
desired pressure is reached. Press PSI/BAR switch to choose to
read pressure gauge by PSI/BAR as you wish.
4. Press light switch for visibility in the dark.
5. Remove the thread connector from the tire and disconnect the
12V car adaptor.
Note: To avoid over-inflation of tires, please check the
recommended car tire pressure in the vehicle's owner's manual. For
bicycle tires, please check the tire marking.
Inflating sporting equipment (i.e. basketball) or party balloons
1. Roll out the 12V cord and connect the 12V adaptor to the
vehicle's outlet.
2. Screw the ball/balloon adapter into the thread connector.
3. Insert the ball/balloon adapter into valve of the object to be
inflated.
4. Operate the air compressor switch until the desired firmness is
reached, or the object is fully inflated. Press PSI/BAR switch to
choose to read pressure gauge by PSI/BAR as you wish.
5. Press light switch for visibility in the dark.
6. Pull ball/balloon adapter from the inflated object's valve and
unscrew ball/balloon adapter from the thread connector.
7. Disconnect the 12 V car cigarette lighter adaptor from the
cigarette lighter socket and store the 12 V cord in the compartment
area.
51