MGTS AC010140 Manuel D'utilisation page 50

Cleaning
Clean the compressor only with a clean and dry cloth.
Do not use cleaning products.
Ensure no dust or dirt will hinder the compressor's proper
functioning before connecting it.
Precautions
• Inspect before each use.
• Do not use the compressor when the vehicle is moving.
• Do not leave device unattended when connected to a 12 volt
direct current socket.
• Do not place the compressor on or near direct heat sources.
• Do not use the compressor in or near a flammable environment.
• Do not bend or block the air hose while the compressor is
running.
• Do not use the compressor if it has been bent, broken, melted or
wetted or if any of its components have been damaged.
• Do not use the compressor on high-pressure tyres such as those
used on commercial, agricultural or special vehicles.
• Exclusively use the adapters provided with the device.
• The compressor is not water resistant.
• Ensure that the cables and hoses connected to the compressor
do not interfere with the vehicle's safe usage.
• After use, store the device in a cool, dry and dust-free location.
• This compressor should not be used continuously. Using the
compressor over an extended period may cause it to overheat
and sustain damages. It is preferable to not use it for longer than
10 minutes without interruption. After 10 minutes, turn off and
leave to cool for 10 minutes before using again.
• In the event of unusual noise or excessive heat coming from the
compressor, immediately turn off and let cool for at least 30
minutes before using again.
• The compressor does not contain any parts that can be serviced
or replaced by the user – do not open.
49