Skil LV941801 Guide D'utilisation page 10

Saves the current reading and display the memory
To save the current reading, press the Save Button . You may save and later display up
to ten values: they may be absolute angle measurements and/or relative angle measurements,
indicated as M1 to M10. Saved relative angle measurements will display with REF preceding
the value. If more than ten results are saved, the oldest remembered measurement (M1) will
be overwritten by the current reading and all the other saved readings will be cleared.
To display the measurements in memory, repeatedly press the Memory Button . The
ten saved measurements will be displayed in sequence, beginning with the most recently
saved measurement together with its corresponding icon reminder M10.
To make a new measurement, press the Memory Button for more than 1 sec or press
the Power Button for no more than 1 sec to return to measuring mode.
NOTE: All the saved readings will be cleared when the digital level is turned off.
10