Applying The Cuff - ProfiCare PC-BMG 3018 Mode D'emploi

4. Applying the Cuff

a. Place the cuff around a bare wrist 1 - 2 cm above
the wrist joint on the palm side of the wrist.
b. While seated, place the arm with the cuffed wrist
in front of your body on a desk or table with the
palm up. If the cuff is correctly placed, you can
read the LCD display.
c. The cuff must be neither too tight nor too loose.
Notes:
1. Please refer to the cuff circumference range in
"Specifications" to make sure that the appropri-
ate cuff is used.
2. Measuring on same wrist each time.
3. Do not move your arm, body, or the monitor during meas-
urement.
4. Stay quiet, calm for 5 minutes before blood pressure
measurement.
5. Please keep the cuff clean. Clean the cuff by wet soft cloth
and mild detergent if the cuff becomes dirty. Do not remove
the cuff from the monitor. Clean the cuff after the usage of
every 200 times is recommended.
156
PC-BMG 3018_IM_new 08.07.19