HC Cargo 211097 Manuel D'utilisation page 11

Navigation
When the HC-CARGO
211097 is initially con-
nected to the vehicles
battery or a 12-24 volt
power supply, it enters
Mode#1
automatically.
To enter into Mode#2
press and hold Mode
button until you hear a
low pitched beep.
To enter into Mode#3
press and hold Mode
button until you hear a
high pitched beep.
To enter into Mode#4
press and hold Mode
button until you hear a
low to high pitched beep.
To enter into Mode#5
press and hold Mode
button until you hear a
mid pitched beep.
To return to Mode#1
press and hold Mode
button until you hear a
high and low beep.
Mode# Display
#1
#2
#3
#4
#5
Actively alterna-
ting + to ÷ to +,
etc.
11
Mode/Function
Power Probe Mode:
With Audio Tone On.
Power Probe Mode:
With Audio Tone Off.
Power Probe Mode:
With the Circuit
Breaker tripped with
Audio Tone On.
Power Probe Mode:
with the Circuit
Breaker tripped with
Audio Tone Off
Negative Peak to
Peak Mode
Positive Peak to
Peak Mode
Peak to Peak Mode
Peak to Peak
Threshold Setting
Mode: Detects Peak
to Peak in Power
Probe Mode.
Vedpak 132_501186_Version 4_12.2017
211097
Output
Displays the average
D.C. voltage.
Displays the Peak
to Peak A.C. voltage
when the voltage is
more than Mode 5
Threshold setting.
Limited to 65 V.
Captures the most
negative voltage
transition.
Captures the most
Positive voltage
transition.
Displays the
difference between
Peak to Peak
voltage.
Sets the Peak to
Peak Threshold
Level for the
Mode#1 display to
transition from D.C.
to A.C.