Alber E-Motion ECS Instructions D'utilisation page 38

ALL FUNCTIONS IN DETAIL
- The LEDs of the e-motion wheels are active when switched on
and at a standstill but off during driving
- The rollback delay is switched off
Note:
- Any individual driving profile programmed by your medical supplies
dealer is not changed by a reset.
- The reset should normally only be performed by an authorised
specialist dealer, since any settings that may have been previously
made will be lost.
- The pairing of the ECS is not affected by the reset either. For „pai-
ring" another ECS remote control, proceed as described in chapter 1.
- Only one ECS remote control can be operated with an e-motion at
a time.
- The ECS remote control cannot be used to adapt (program) the
driving profiles. A medical supplies dealer has a smartphone app
available for this purpose.
38