Resetting The E-Motion Wheels - Alber E-Motion ECS Instructions D'utilisation

ALL FUNCTIONS IN DETAIL
- Actuate the on/off button of the corresponding e-motion wheel.
- The LED of the other e-motion wheel now flashes and an acoustic
signal is also heard.
- Now actuate the on/off button of this wheel.
- The link symbol in the LCD of the ECS remote control [2] goes out.
- The flashing Bluetooth symbol in the LCD of the ECS remote
control [2] is now displayed continuously.
- The pairing process has been successfully completed. The ECS
remote control can now be used.

2. Resetting the e-motion wheels

- Switch on both e-motion wheels via the on/off button of the ECS
remote control.
- Wait until the e-motion wheels are connected with the ECS
remote control and the Bluetooth symbol
displayed in the LCD of the ECS remote control [2].
36
is continuously