CIAT RG57A3/BGEF Manuel D'utilisation page 9

CONTENTS
Remote controller Specifications...................................................
Function buttons .................. .........................................................
Handling the remote controller ......................................................
Remote LCD screen indicators .....................................................
How to use the basic functions........................................................
How to use the advanced functions ...............................................
Remote Controller Specifications
Model RG57A3(B)/BGEF, RG57A8(B)/BGEF,
3.0V(Dry batteries R03/LR03×2)
Rated Voltage
Signal Receiving Range
8m
。 。
Environment ~
-5 C 60 C
1
Function Buttons
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use Basic Functions section of this manual.
1
ON/OFF
Turns the unit on or off
3
MODE
Scrolls through operation
4
modes as follows:
AUTO g COOL g DRY g
5
HEAT g FAN
NOTE：Please do not select
6
HEAT mode if the machine you
purchased is cooling only type.
13
Heat mode is not supported
by the cooling only appliance.
FAN SPEED
Selects fan speeds in
the following order:
AUTO g LOW g
MED g HIGH
SLEEP
Saves energy during
sleeping hours
FRESH
Press this button, the
Ionizer/Plasma Dust
Collector(depending
on models) is energized
and will help to remove
pollen and impurities
from the air.
TURBO
Enables unit to reach
preset temperature in
shortest possible time
ECO
Used to enter the energy
efficient mode.
(Only apply to hi-wall
single system.)
TEMP p
Increases temperate in
O
1 C increments.
Max. temperature is
O
30 C .
TEMP q
Decreases temperate in
O
1 C increments.
ON/OFF
Min. temperature is
O
17 C .
TIMER
MODE
TIMER ON
ON
TEMP
Sets timer to turn unit
TIMER on (see How to Use
FAN
OFF
Basic Functions for
instructions)
SLEEP FRESH
TIMER OFF
TURBO CLEAN LED FOLLOW
Sets timer to turn unit
off (see How to Use
Basic Functions for
instructions)
SWING
Starts and stops louver
movement
FOLLOW ME
Temperature sensing
and room temperature
SELF CLEAN
display button.
Starts and stops
self clean feature.
LED
,
Turns indoor unit s LED display on and off.
If you are sensitive to light when you go to
sleep, you can press the LED button to turn
off the LED display on the indoor unit. Press
the button again to turn it back on.
MODEL:RG57A8(B)/BGEF
2