Nicols Moove led Manuel D'utilisation page 13

3.3 Smartphone App control
WIFI setting
1) Pls down load the LedHome APP by the QR code below:
2) WIFI Setting: Open mobile WIFI Settings page, click the name of "LEDxxx " WLAN links, after the success linking, open
LedHome Software to scan, choose the single point control, then can carry on corresponding operation interface. When
WiFi signal receiving accident interrupt and cannot control, please set WiFi module to restore factory Settings in MENU.
3.4 DMX Channel instruction
6-Channel Mode
CH DMX Value
CH1 0~255 Red dimming
CH2 0~255 Green dimming
CH3 0~255 Blue dimming
CH4 0~255 White dimming
CH5 0~255 Amber dimming
CH6 0~255 UV dimming
10-Channel Mode
CH DMX Value
CH1 0~255 Dimmer,the ninth channel(0~9)
CH2 0~255 Red dimming
CH3 0~255 Green dimming
CH4 0~255 Blue dimming
CH5 0~255 White dimming
CH6 0~255 Amber dimming
CH7 0~255 UV dimming
CH8 0~9 Strobe OFF
10~255 Strobe from slow to fast
CH9 0~9 Dimmer mode
10~49 Color selection: The tenth channel choose color
50~89 Color jump change: The tenth channel control speed
90~129
Color gradual change: The tenth channel control
speed
130~169
Color pulse
eed
170-209 Sound 1
210~239 Sound 2
240~255 Sound 3
CH10 0-255 This Channel depends on the value of the Ninth
channel
1. The value of the ninth channel is 10-49, this
channel is for color selection
2. The value of the ninth channel is 101-250, this
channel is for speed adjustment(0 is the slowest, 255
is the fastest)
Function Instruction
Function Instruction
change: The tenth channel control sp
12