Madison MAD-LINK Manuel D'utilisation page 5

5. Playback music in your mobile device when the WIFI Speaker do not access
internet.
When the WIFI Speaker do not access internet, you can turn on WIFI in the
Settings App and connect your mobile device to a network with a prefix of "MAD-
LINK". Then you can display songs in your mobile device through the WIFI
Speaker.
6. Playback music through music player software other than MADISON APP
This Wifi speaker supports DLNA, Airplay, Qplay protocol.
So it can playback music directly through your music player such as Itunes, QQ
music...
First, connect your mobile to the speaker or set them up in the same Wifi router.
Open your music player and music push icon will be shown on the playback interface. Press this icon and you
can select the device Wifi speaker to playback music.
Support WIFI hotspot
Plug in a cable with Internet access. Then, the WIFI network with a prefix of "MAD-LINK" becomes a personal
hotspot and you can surf on the internet.
Multi-mobile Control
When the WIFI speaker is successfully connected to the router, use another IOS/Android device with a WIFI
speaker APP and set it to the same router. Open the APP. Then it will search the DEVICE LIST automatically.
Quick play setup
Press the button on the right side of the play list or radio channels, and select a quick play button in the pop up
window. Then you just need to press one key on the speaker to display what you want. (The speaker must be
connected to the WI-FI).
Note: If you want to preset local music, you must first add it to "my favorite", then set it up as above. Long
press F1/F2 on WIFI speaker, then it will reset to defaults.