Télécharger Imprimer la page

Use And Operation - Petermann PM-EVA-7053-H Mode D'emploi

Système d'evacuation

Publicité

Les langues disponibles

Les langues disponibles

1.
Technical details and scope of supply
Item no.:
PM-EVA-7053-H
suitable for all bed types, mattresses and bed
frames
Color:
white
Dimensions:
2.000 x 870 mm
for bed size:
length
width
ILN:
4250355370532
Material:
PVC coated polyester fabric,
with ventilation openings,
latex free
Scope of supply:
Evacuation sheet with side wings
incl. control tag and four rubber strips for fixing
Manual
German TUV approved according to
DIN EN 1865:2010
2.

Use and operation

The evacuation system was exclusively designed for the use in rehabilitation beds for the quick, safe and gentle
evacuation of non ambulant persons. Place the evacuation sheet in the middle of the bed directly on the slatted
frame. The folded belts with belt buckle are positioned with a rubber band each. The plugs of the belt buckles should
be positioned at the accessible side of the bed.
The mattress must be put on the evacuation sheet and the bulk belts should be covered by the mattress. Mark each
bed that contains an evacuation sheet by leaving the control tag visibly outside.
Option:
If necessary you can fix the evacuation sheet to the mattress with the four rubber strips enclosed. Draw the rubber
strip each through the perforation opening that is nearest to each edge of the evacuation sheet. The strip is like a
loop and can be slipped over each edge of the mattress. Now the evacuation sheet is fixed to the mattress.
3.
Rescue situation
Stand in front of the accessible side of the bed. If possible, lower the head and leg part of the bed into the lying
position. Put the bedding carefully on and around the patient. Pull both plugs of the belts out from under the
mattress. Knee on the bed and pull the opposite belt parts out from under the mattress. Click into place both parts
of the belts, each with its opposite counterpart.
Pull each of the belts with its loose end strongly and as much as possible. This way you will obtain an u-form of the
mattress that could protect the person lying in it from crushes. The mattress is fixed safely on the evacuation sheet
now. With taking the large handles of the evacuation sheet at the head or leg side you can pull the sheet together
with the fixed mattress out from the bed over the floor, through doors and/or over stairs to
an area which is safe for the patient. If the rescue situation makes it necessary (to get over
an obstacle for example) you can carry the evacuation sheet for a short time by using the
handles on both sides, head or leg side of the sheet. There are additional carry handles in
the middle of the long side of the sheet that allows carrying the evacuation sheet with up
to 6 assistants.
2017-01
190 to 205 cm
80 to 100 cm
Made in Germany
max.
200 kg
4 / 7

Publicité

loading