Controls At A Glance; Basic Operation - LENCO Xemio-769 Mode D'emploi

 Controls at a glance:
 Connect to the PC & Download audio files from PC
Connect the player to computer for downloading the files or charging the player.
1. Make sure that your computer is switched on before you connect the Xemio to your computer
2. Use the enclosed Micro USB cable to connect it to your computer and it loads to a screen indicating "Charge & transfer" or
"Charge & play".
3. The player has no built-in memory. Your music/video files have to be stored on a MicroSD card (included).
3.1 If the player is connected with MicroSD inserted, the computer will show it as removable disk.
3.2 If the player is connected without MicroSD inserted, the computer will recognize it but doesn't show it as removable disk.
4. When the MicroSD card is inserted, you can drag and drop files from your computer to your Xemio player.
Note:
1. The battery charging animation will show when the player is connected to the computer.
2. Do not disconnect the player from computer during data transfer, it may damage the player/MicroSD card.
3. When the powerswitch (11) is off, the computer will recognize the player, but the battery will not be charged.
-
Important notice:
-
-
-
 Basic Operation
Function Instruction

Power on/off



Main menu
Listening to music
Select the Music icon and push the play/pause (8) button, a new list will appear showing the following: All
songs, Last played, Artists, Albums, Genres, Playlists and Update Playlist.

Bluetooth
Select the Bluetooth icon and press the play/pause (8) button.
A list will appear showing the following: BT Control, Search Device, Device List, All Songs, and Now
If the player doesn't power up, please check the powerswitch (11). It must be switched to "on";
Make sure the powerswitch (11) is in the 'on' position before charging the player, to prevent reminding
messages on the lcd screen.
The player comes without built-in memory, please insert a Micro SD card into the player before
operation;
The players Bluetooth mode is only for transmitting to Bluetooth devices like headsets or speakers. It
can't be connected to mobile phones or computers.
Turn the power switch (11) to 'on' to power on the player
If the player does not power on then long press
When no buttons are pressed or no music is played for some time, the player will power off
automatically to save battery, it will power off automatically by itself.
Use the arrow to navigate through the main menu and select the desired function with the play/pause
button (8) (Music, Bluetooth, Video, Pictures, Recorder, EBook, Folder view, Settings or Tools.)
Press the play/pause (8) button on "all songs". Choose a song and press the play/pause (8) button to
start playing on 'All songs' and select one song then the player will start playing.
1) [VOL+]: Increase the volume.
2) [VOL-]: Decrease the volume.
3) Screen: 1.8inch TFT.
4) [ ]: Short press for previous track/long press to rewind.
5) [ ]: When on the song screen, press M to change play mode.
6) [ ]: Return to previous menu.
7) [ ]: Short press for next track/long press to fast forward.
8) [ ]: Enter key/play and pause/long press to switch on/off.
9) [ ]: Micro SD card slot, Supports up to 64GB.
10) [ ]: Micro USB port, data transferring & recharging
11) [ ]: ON/OFF switch.
12) Earphone Socket: φ3.5mm
13) MIC: recording voice
button to power on.
5