Restore Factory Settings; Maintenance And Cleaning - eQ-3 eqiva Key-BLE Mode D'emploi

9

Restore factory settings

When the factory settings of the device are restored,
all settings will be deleted.
To restore the factory settings, please proceed as follows:
Remove the battery compartment cover (F) (see fig. 4).
•
• Remove one of the batteries.
• Re-insert the battery making sure that it is right way
around. Press and hold down the button "Lock" (E)
for 4 seconds until the device LED (D) starts to flash
quickly orange.
• Release the button "Lock" (E).
• Press and hold down the button "Lock" (E) again for 4
seconds, until the device LED (C) lights up green.
• Release the button "Lock" (E) to finish the reset pro-
cedure.
The lock cylinder moves to the position "open" (final posi-
tion) once and the device performs a restart.

10 Maintenance and cleaning

This product does not require you to carry out any main-
tenance other than replacing the battery when necessary.
Enlist the help of an expert to carry out any maintenance or
repairs. Clean the product using a soft, lint-free cloth that is

Restore factory settings

45