SOLIS 1030 Mode D'emploi page 37

CALIBRATION
• For calibration, switch the appliance on with
the ON/OFF button and press and hold the
MODE button for 3 seconds. "CAL" lights
up in the display. Briefly release the MODE
button before pressing it again to calibrate
ZERO.
• Now, "200.0 g" lights up in the display. Place a
weight of 200 g in the centre of the weighing
platform. If the calibration is correct, "PASS"
lights up in the display. Otherwise, "200.0 g"
flashes permanently in the display. If this is the
case, please repeat the calibration.
• The calibration process has to be performed
carefully and with utmost delicacy, as it cannot
be undone and can only be compensated by
another calibration process. If the weight
used for the calibration process is not exact-
ly "200.0 g", the scale will display incorrect
weights after calibration.
Press and hold
MODE for 3 sec.
Apply
200 g weight
"CAL" is
displayed,
press MODE
again
Calibration
complete
37