SOLIS 1030 Mode D'emploi page 35

2. Use the MODE button to set the desired unit of
measurement. You can select "g", "oz", "ozt"
and "ct". The selected unit of measurement
lights up to the right of the number.
g
ozt
3. Place the item you want to weigh in the centre
of the weighing platform. The correct weight
is being displayed when "hold" lights up to
the left of the number.
4. If before weighing the display does not state
"0.0", press the TARE button to set the display
to "0.0". The indication "zero" lights up in the
bottom left corner next to the weight.
"0.0" is not
displayed before
weighing
oz
ct
20 g
weight
according to
selected unit of
measurement
Press
TARE
"0.0"
is displayed
35