Brandt FC-26MEB Manuel D'instruction page 17

a. Press OVEN button four times into the ROTISSERIE programme.
b. Press Minuterie pad ,Set the time by pressing the increase or decrease button. The timer will change for
each press. Holding the button will cause the time to change rapidly increments
c. Press the TEMP button. The default temperature is 150°C (this can be adjusted).To change this temperature,
press the + or - button to move to the desired temperature. The temperature will increase or decrease in 10°C
increments. The temperature for the fan bake programme is 230°C.
d. Open the door and place your food in the oven and press START.
e. When the programme is complete, the unit will beep continually.
Removing Rotisserie Forks
Use the rotisserie handle to remove the rotisserie forks from the rotisserie tray, and
then remove it from the rotisserie hole.
Rotisserie Handle
Always use the rotisserie handle to remove the rotisserie forks
Using the Pizza function
a. Press PIZZA button into the PIZZA programme. the display will show "PIZZA".
b. Press Minuterie pad, set the time by pressing the + or - button. The timer will change for each press.
Holding the button will cause the time to change rapidly increments. Open the door and place your pizza in
the oven and press START.
c. When the programme is complete, the unit will beep ten seconds continually.
Using the Keep Warm function
a. Press Maintien au Chaud button into the KEEP WARM programme.
b. Press Minuterie pad, set the time by pressing the + or - button. The time will change for each press. Holding
the button will cause the time to change rapidly in ten-minute increase.
c. Open the door and place your food in the oven and press START.
d. When the programme is complete, the unit will beep continually.
Using the Defrost function
a. Press DEFROST button into the DEFROST programme.
b. Press Minuterie pad, set the time by pressing the + or - button. The timer will change for each press.
Holding the button will cause the time to change rapidly increments
c. Open the door and place your food in the oven and press START.
d. When the programme is complete, the unit will beep continually.
Using the Clock function
Set the clock when the oven is plugged in.
.When the oven is first plugged into a wall outlet,
1. Touch the CLOCK pad long time, the display will show "Hr24" and "CLOCK" will flash continually.
.a. First of all, set the HOUR by pressing the increase or decrease button. The time will change for each press.
b. Again, Press CLOCK pad, Set the timer by pressing the increase or decrease button.
2. Touch the CLOCK pad long time, the display will show "Hr24" and "power", Again Touch the CLOCK pad once,
the display will show "Hr12" and "CLOCK" will flash continually.
.a. First of all, set the HOUR by pressing the increase or decrease button. The time will change for each press.
b. Again, Press CLOCK pad, Set the MINUTE by pressing the increase or decrease button.
Using the stop/cancel function
Touch the STOP/CANCEL pad once to stop the cooking (re-touch to continue timing show on cancel).
Using the timer/temp. function
Touch the TIMER/TEMP. pad once to start the timer (re-touch to continue timing show on temp.).
15
.