Instructions For Use Tm13; Introduction; How Does It Work - Marmitek TM13 Guide Utilisateur

INSTRUCTIONS FOR USE TM13

INTRODUCTION

Congratulations with your purchase of the Marmitek X-10 HOME CONTROL TM13
Transceiver. Among other things, the TM13 Transceiver allows you to use your Marmitek
X-10 remote control to operate your X-10 switching and dimming modules, wherever
you are in your house.

How does it work?

The TM13 is a controller that is activated by transmitters. The controller operates
Marmitek X-10 modules via the mains to switch your lighting and appliances on and off.
This means that the TM13 forms the heart of your Marmitek X-10 installation.
The TM13 Transceiver operates with the following transmitters:
• Marmitek X-10 remote controls such as the EasyControl8 and the EasyTouch 35.
• The SS13 slimline wireless switch (the ideal solution for situations that require an
(additional) switch without having to fit wires. Can be fitted to walls, glass, doors,
tables, etc.)
• The KR22 wireless remote control (an attractive extra-slim remote control for opera-
tion of Marmitek X-10 Modules from a distance. Can be used as a key ring. Can be
used to control three addresses + dimmer function.)
• The MS13 wireless motion sensor with memory (switches lighting and appliances on
when someone is present and switches them off again afterwards. Switches on
interior and exterior lighting when arriving home in the dark.)
6 © MARMITEK