Kensington Charge and Sync Cabinet Guide D'instructions page 10

3 Press the Sync Button to start the sync process.
4 iTunes will launch and syncing will start automatically.
5 When syncing is completed, an Eject icon will appear next to each device. Click on the
Eject icon or close iTunes to safely eject the iPad.
6 Unplug the USB cable from the computer so charging can begin.
IMPORTANT!
Charging will not occur until the USB cable is unplugged from the host computer.
Locking
Option 1
Sync disabled (LED = Off)
Sync enabled (LED = Red)
3
2
1
10