Maintenance; Resetting; Cleaning - Pressalit Care indivo Manuel D'utilisation Et D'entretien

Maintenance

It is recommended on a weekly basis to run the motors on the product to their
maximum positions by raising the product to its full height, and then lowering
it to its lowest position, so that the internal parts are lubricated .

Resetting

It is also recommended on a weekly basis to reset the lifting mechanism .
• Hold in the switch until the table top stops in the lowest position .
• Release the switch .
• Press and hold in the switch once more for 5 seconds . Perform the same
operation for the wall cupboards .
en

Cleaning

Use ordinary soapy water and dry with a soft cloth . Avoid the use of abrasive,
etching or chloride cleaning agents .
12