ACDelco ARM602-3 Manuel Informations Du Produit page 10

3. If you want to quickly go through to the target torque value, just press it the Up
Button (5) and Down Button (4) continuously.
4. When the target torque value is displayed, press the "Power Button (3)" 2 seconds to
confirm your selection. (or wait for 5 seconds the system will automatically
confirm your selection)
NOTE
1. When you are reaching 90% of the target torque value, an intermittent buzzer
will start to warn you.
2. When the target torque value is reached, a high-frequent buzzer will warn you
not to pull further.
MEMORY FUNCTION
The system will memory the "mode" and "unit" selection which you set even you
change coin cells.
RESET MEMORY FUNCTION
To clean the memory, just press the "Down Button (4)" and "Up Button (5)" together
for 2 seconds.
COUNT FUNCTION
Just press the "Power Button (3)" and "Up Button (5)" together to show how much
times this adapter has been used.
NOTE
The system will record this time automatically when the torque value
reaches the target torque value you set. The counter unit is thousand as shown "K",
and the maximum is 999K.
OVERLOAD ALARM/RECORD
The system will show "999" on the display if the torque exceeds 120% of the
maximum torque, and a high-frequent buzzer will warn you not to pull further. After
that the "999" will be shown for 1 second every time when you power on this adapter.
NOTE
Overload will damage this adapter and lose its accuracy. Please return
this adapter to an authorized service center to calibrate it and eliminate the "999".
AUTO POWER OFF
This adapter will be shut off automatically after 60 seconds of no use.
HOW TO USE AS A TORQUE WRENCH
Connecting the adapter to ratchet wrench, and socket.
INCORRECT OPERATION
1English1
English -9