Technical Specifications - Granit BM Manuel D'utilisation

English
1. Main components (fig. 1)
1) main compressor
2) pressure switch
3) outlet valve
4) regulating valve
5) pressure gauge
6) one-way valve
7) Drain
8) Wheel
9) Discharge pipe
10) Air tank
11) safety valve
12) Fan cover

2. Technical specifications

Model
Power
Voltage (V)
Frequency (Hz)
Current (A)
Motor poles
Max. rpm
Theoretical discharge (cfm)
Autostop pressure
Autostart pressure
Tank capacity (l)
Dimensions (cm)
Air outlet connection
Net weight (kg)
3. Preperations before regular use
1) check all bolts and nuts before first use and tighten up if necessary.
2) The surroundings of the compressor should be clean, dry and well ventilated.
3) Keep the voltage steady and prevent it from varying more than 4% while in use.
4) Keep the oil level within the red circle.
5) recommended compressor oil:
Use sAe30 or L - DAB100 with temperatures > 10°c
Use sAe10 or L - DAB68 with temperatures < 10°c
6) open the outlet valve before starting for the first time. Turn the pressure switch to „on" (fig. 2 on next page). Let the compressor run
for 10 minutes without load to make sure that all moving parts are lubricated before regular use.
12
1
11
9
8
7
1 kW (1.4 hp) & 1.5 kW (2 hp) & 1.8 kW (2.4 hp)
100 / 110 / 120 220 / 230 / 240
60
15
2p
3450
24
60 x 29 x 64
28
fig. 1
Data
Bm
50
7.5
2p
2850
7.3
115 psi (0.8 mpa)
70 psi (0.5 mpa)
30
69 x 32 x 64 69 x 30 x 71
1/4"
31
2
5
4
3
6
10
220
60 60
7.5 5.5
2p 4p
2850 1750
40 50
77 x 33 x73
33 38