Kitchen Scales - SEVERIN KW 3667 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
GB

Kitchen scales

Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Familiarisation
1.
Display selection key
2.
Weighing platform / glass plate
3.
Plastic housing
4.
On/zero-reset-key
5.
Digital display
6.
Battery compartment
7.
Rating label
Important hints
∙ If repairs are needed, please send the
appliance to one of our customer service
departments. The address can be found
in the appendix to this manual.
∙ Do not clean the scales with liquids or
immerse them.
∙ The display can be changed between
grams (gm) and ounces (oz) by using the
appropriate key (1).
∙ These scales have a maximum
load capacity of 5000g / 176.37 oz
(accessories included). If this capacity is
exceeded, the symbol 'EEEE' appears in
the display.
∙ These scales are designed for household
use and are not suitable for medical or
commercial applications; they are not
offi cially calibrated.
Before using for the fi rst time
Before the scales are used for the fi rst
6
time, the protective strip in the battery
compartment must be removed.
Fit the glass plate onto the centre axis with
the centre bolt. To secure the plate, use
a suitable screwdriver to tighten the small
grub-screw on the side of the bolt.
Operation
∙ Position the scales on a fi rm and level
surface.
∙ To weigh recipe ingredients, place a
suitable bowl or container on the platform.
Solid ingredients may be put directly onto
the scales.
∙ To switch the unit on, press the 'On' key.
The '0' symbol appears in the display. To
allow for any additional weight, always
make sure to position any accessories
(bowl etc.) on the platform before the unit
is switched on.
∙ Add the ingredients to the bowl (or other
accessory) used, until the desired weight
is displayed.
∙ To add more ingredients without fi rst
emptying the container, the zero-reset key
may be pressed again. In this way, only
the additional weight is displayed.
∙ After use, the scales may be switched off
by holding down the On/zero-reset key for
2-3 seconds. However, the unit will switch
off automatically if no key is pressed
within a 90-second period.
Battery
∙ The symbol
needs replacing.
∙ To insert or replace the battery, open the
battery compartment located underneath
the unit. When inserting the battery,
always observe the correct polarity. The
symbol (+) must face upwards.
appears if the battery

Publicité

Table des Matières
loading

Table des Matières