Preparing The Product For Use; Safety Precautions Before Use; Unpacking; Safely Disposing Of Packaging Material - Videorec Maximus MBA Manuel D'instructions

6 Preparing the product for
use
Consult the use instructions of the
explosion-proof box.
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.

6.1 Safety precautions before use

Consult the use instructions of the
explosion-proof box.
Make connections and tests in the
laboratory before carrying out installation
on site. Use appropriate tools for the
purpose.
Before doing any technical work on the
device, disconnect the power supply.

6.2 Unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
When returning a faulty product we recommend
using the original packaging for shipping.
Keep the packaging in case you need to send the
product for repairs.
6.3 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Explosion-proof communication box in aluminium
• Explosion-proof box manufacturer's manual
• Instruction manual
6.4 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
MNVCMBA_1908_EN
6.5 Preparatory work before

installation

Make sure the appliance is securely
anchored before supplying power.
Since the user is responsible for choosing
the surface to which the unit is to be
anchored, we do not supply the fixing
devices for attaching the unit firmly to
the particular surface. The installer is
responsible for choosing fixing devices
suitable for the specific purpose on hand.
The product must be fastened with suitable
equipment. The fastening means must
guarantee mechanical sealing when a force
equal to at least 4 times the weight of the
device is applied.
7 Installation
Consult the use instructions of the
explosion-proof box.
CAUTION! Device installation and
maintaining must be performed by
specialist technical staff only.
Make sure that the installation complies
with local regulations and specifications.

7.1 Range of use

Consult the use instructions of the
explosion-proof box.
Operating temperature: from -40°C (-40°F) up to
+70°C (158°F).
7.2 Communication box
fastening
Consult the use instructions of the
explosion-proof box.
9