Prepare The Installation - Venmar C180 Série Directives D'installation, D'utilisation Et D'entretien

3. PREPARE THE INSTALLATION

When performing installation, servicing or cleaning the unit, it is recommended
to wear safety glasses and gloves.
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or
damaged, contact the manufacturer.
Make sure the following items are included:
- Hood
- Filters (2)
- 3¼'' x 10'' Adapter/damper (located inside the hood, under the bottom panel)
- Bag of parts including:
(1) wire clamp, (5) 1/2'' double thread screws, (2) wire connectors and (6) 1/2'' screws
Parts sold separately:
- Shielded halogen lamps (120 V, 50 W, MR16 or PAR16 with GU10 base), two included in
Connaisseur models only
- Transition 3¼" x 10" to 6" round (optional, for 6" round ducts installation only)
NOTE: If the bottom of the cupboard is recessed, attach wood strips (not included), as shown
below, in order to properly install the range hood (A) or charcoal filter unit (if need be) to
the cabinet (B). The wood strips must be as thick as recess.
A
3 8
2 "
HO0002A
Cut-out the openings for duct (A) and power cable (B), in cabinet or wall, according to the
direction of discharge chosen.
See illustrations below.
H
ORIZONTAL DISCHARGE
A
3½"
5¼" 5¼"
HD0150A
!
:
C L
1 8 "
11
B
1¼" dia.
WARNING
3¾"
7 8
"
HD0151A
- 5 -
B
HD0033
V
ERTICAL DISCHARGE
CABINET BOTTOM
C L
A
10½"
1
5¼" 5¼"
¾"
:
¼
"
1½"
3 8 "
B