Installation - Urmet 1092 Manuel D'utilisation

6

INSTALLATION

 Unscrew the two screws on the adjustable support, insert them in the base until they come out from the two holes
and join the two parts by tightening the screws.
 Insert the metal particular of the holder in the suitable slot, present in the rear side of the monitor, and lock the
holder at the desired height using the ring.
Adjust the monitor inclination using the locking screw on the bracket.

 Fix the monitor holder base to the supporting surface using the provided adhesive film.
LOCKING SCREW
BLOCCO
 Perform the connections needed for device operation.
DS1092-181A
UNSCREW
LOCKING RING
METAL INSERT
15
INSERT THE SCREWS
INTO THE TWO HOLES
SLOT ASOLA