GBC CombBind C110 E Manuel D'utilisation page 7

Quickstep Guide 1-2-3 (fig.10)
The QuickStep Guide label on the machine is a quick reference
guide to how to bind in three quick and simple steps.
Understand the comb size required by measuring on the
1
document size area 1, select the appropriate ProComb.
Load the ProComb with the dot to the left and open until
2
you see the coloured arrow.
Punch and load your document on to the spine until your
3
document is complete. Close the spine.
ZipComb spine (fig.9)
The ZipComb spine allows you to create an easily editable
document with comb punch orientation.
Place the adaptor on to the metal teeth.
1
Place the spine into the zip holder as shown in fig.4.
2
Load and punch paper as per 'Binding' section 6-8.
3
Load punched paper on to spine.
4
Remove document and spine, close the ZipComb using the
5
zipper included in the ZipComb boxes.
Complete by flipping the back cover around the spine, for a
6
professional finish where the spine is hidden.
Empty chip drawer (fig.8)
• Your CombBind C110 E has a chip drawer located on the
right side of the machine.
• When it is full of punched paper chips, a red light
will illuminate.
• Gently pull the drawer to open it and remove from machine,
empty and re-insert the drawer back in machine until it
snaps in place.
(fig.5)
G
7