1
Fig. 3: Position of the washers and nuts [mm]
f Secure each flat steel bar with a nut and a washer,
taking account of the Fig. 3. Make sure that the founda-
tion fixing set is aligned in the horizontal position.
f Assemble the associated foundation or adaptor plate (1)
(available as an accessory), taking account of the Fig. 3
on the foundation fixing set.
The remaining four washers and nuts are for fixing the pro-
duct or adaptor plate (for the stainless steel column) to the
foundation fixing set.
Observe the operating and installation instructions for
the respective product.
2