Publicité
Les langues disponibles
Les langues disponibles
The foundation fixing set is required in order to manufac-
ture a foundation yourself. The following MENNEKES pro-
ducts can then be mounted on the foundation:
„ Charging stations: Smart N / SN, Smart T / ST, AMEDIO
„ Wallbox AMTRON® and AMTRON® Compact: mounting
on a pole
„ Wallbox AMTRON®: mounting on a stainless steel
column
In addition to the foundation fixing set, the following foun-
dation or adaptor plate is required:
Product
Smart N / SN
Smart T / ST
AMEDIO
Pole
Stainless steel column
Delivery contents
„ 16 x hexagon nuts (M12, steel, galvanised)
„ 16 x washers (steel, galvanised)
„ 4 x threaded rods (M12 x 750, strength class 4.6, steel,
galvanised)
„ 3 x flat steel bars with identical holes (steel, galvanised)
Foundation or adaptor plate
Foundation plate 18515
Foundation plate 18567
Foundation plate 18590
Foundation plate 18590
Adaptor plate 18591
Installation
Depending on the product, it is necessary to use different
drill holes in the flat steel bar:
1. Dimensions for fixing a Smart N / SN, T / ST charging
station:
B
Fig. 1: Dimensions [mm]
2. Dimensions for fixing an AMEDIO charging station plus
a pole and stainless steel column:
B
Fig. 2: Dimensions [mm]
f Insert the threaded rods into the flat steel bars taking
account of the dimensions in the Fig. 1 and Fig. 2. Make
sure that the flat steel bar (A) and the flat steel bars (B)
are arranged at right angles (90°).
B
A
B
A
EN
1
Publicité
