Plug & Play (Initial Setup) - Samsung 6 Série Mode D'emploi

When the TV is initially powered on, a sequence of on-screen prompts will assist in coniguring basic settings.
Press the POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected (p. 6).
✎
The option may differ depending on country.
1
Selecting the OSD Language Press the ▲ or ▼ button, then press the ENTERE button.
2
Setting up the Network
3
Software upgrade
4
Selecting the usage mode
5
Selecting a country
(Depending on the country)
6
Setting the Clock Mode
7
Selecting search options for
auto tuning
8
Enjoy your TV.
If You Want to Reset This Feature...
You should do Plug & Play
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0"
(except France). If you want to change the PIN number, use the Change PIN function.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode,
which resets the PIN to "0-0-0-0"(France: "1-1-1-1"):
Plug & Play (Initial Setup)
Select the desired OSD (On Screen Display) language.
Set up your network connection. Press the ENTERE button to start.
If you do not know your network set up information or want to set to it
later, select Skip. We suggest you skip network connection setup now
and refer to "Network menu" in the e-Manual for set up requirements and
instructions, and the Network Connection section of this manual (Page 13).
You can set up the network connection later using the Network menu.
When network connection settings are complete, Software Upgrade is
available. Select Next to upgrade TV software. Your TV will automatically
upgrade, if your TV need a software upgrade. If you want to upgrade
later, select the Skip. For more information, refer to "Software Upgrade"
(Preference → Support) in the e-Manual.
✎
This may take some time, depending on network status.
Press the ▲ or ▼ button to select Home Use, and then press the
ENTERE button twice.
Select the Home Use mode. Store Demo mode is for retail environments.
Press the ▲ or ▼ button, then press the ENTERE button.
Select the appropriate country.
✎
After selecting the country in the Country menu, some models may
proceed with an additional option to setup the pin number.
✎
When you input the PIN number, "0-0-0-0" is not available.
✎
The option may differ depending on country.
Set the Clock Mode automatically or manually.
Press the ▲ or ▼ button, then press the ENTERE button. Select the
channel source to memorise. When setting the antenna source to Cable, a
step appears allowing you to assign numerical values (channel frequencies)
to the channels. For more information, refer to Channel - Memorising
Channels - Auto Tuning.
✎
When Aerial or Cable is selected first: After all Aerial or Cable
channels are stored, the step for storing Satellite channels is
displayed.
✎
When Satellite is selected first: After all Satellite channels are stored,
the step for storing Aerial or Cable channels is displayed.
✎
Press the ENTERE button at any time to interrupt the memorisation
process.
If you want to watch a broadcast program, select Close. If you want to
enjoy the Smart Hub, select the Smart Hub. The Smart Hub will start. For
more detailed information, refer to "Smart Hub" in the e-Manual.
→ System) again at home although you did in shop.
(MENU
English - 7
→ 8 → 2 → 4 →
MUTE POWER (on).