Listening To Music; Connecting With Bluetooth - Korg NC-Q1 Manuel D'utilisation

Operation

Listening to music

Connecting with Bluetooth

■
Turn on this unit and the connected device to playback music.
1. Make a Bluetooth connection between this unit and the device to be
connected.
2. Playback the music from the connected device.
• The music is played back from this unit.
Connecting with a headphone cable
■
When the included headphone cable
is connected, this unit can be used as
regular headphones, even when the
unit is turned off.
Connect the headphone cable and
turn on this unit to use it as noise-
cancelling headphones.
Using the function button
■
Use the function button on the right side of
this unit to perform playback operations and
adjust the volume.
• Play/pause track: Press.
• Next track: Press twice quickly.
• Previous track: Press three times quickly.
• Increase/decrease volume: Move to +/–.
• Start Siri (iOS)/Google Assistant (Android
Hold down for more than two seconds.
• Make sure that the headphone cable is fully inserted.
• The headphone cable can be connected on either the left or right
side of the unit. When the cable is connected to both the left and
HINT
right sides, the right side has priority.
• Turning on this unit while wearing it with a Bluetooth connection
established may automatically start music playback.
• Connecting the headphone cable to this unit with a Bluetooth
connection established cuts the Bluetooth connection and gives
priority to the sound from the headphone cable connection.
• When the headphone cable is connected, a Bluetooth connection
cannot be established.
Using the phone
■
When connected to a smartphone or mobile phone via Bluetooth, you can
make calls using the microphone in this unit. Check that the device to be
connected supports the call function profiles.
Supported profiles of this unit
● HSP (Headset Profile): Making calls
● HFP (Hands Free Profile): Making and receiving calls
NC-Q1 SMART NOISE CANCELLING DJ HEADPHONES
TM ):
En
11