Advanced Features - Alto Professional LIVE 25 Guide D'utilisation Rapide

ADVANCED FEATURES

FACTORY RESET- If you press and hold both【-】and【+】 buttons while turning on this product, this will
reset the keyboard to factory default settings. The initialization operation will also erase all user settings.
TRANSPOSE AND OCTAVE
Octave:
By default, you can use the【- , +】button for octave shift.
When the octave is shifted, the related button indicator will be on.
The octave shift range is 3 octaves. Press the【- , +】buttons simultaneously will set the octave
shift to 00, and the indicator will be off.
Transpose:
Press and hold down the SHIFT button while use the 【- , +】buttons. You can shift the
keyboard pitch in semitones.
When the transpose value is changed, the related button indicator will flash slowly.
The transpose range is 12 semitones. Hold the SHIFT button and press both 【- , +】buttons
simultaneously will set the transpose shift to 00, and the indicator will be off.
When both octave and transpose values are changed, the related buttons will flash quickly.
The default keyboard ranges of keyboard are shown below:
WORKING WITH THE JOYSTICK
Move the joystick to the left/right to send the PITCHBEND message.
Move the joystick upward to send the MODULATION message.
Move the joystick downward to send the assigned message.
【
You can use the ASSIGN JOYSTICK
USING THE PEDAL INPUT:
By default, PEDAL is used with a sustain pedal and sends a CC#64 message. The data value is either 0 or
127(switch data).
To change pedal type or polarity, please use the system settings function
You can customize the MIDI data to be sent using the【ASSIGN PEDAL】feature
SENDING BANK LSB/MSB MESSAGES:
Sends the LSB (Least Significant Bit) and MSB (Most Significant Bit):
1.
Hold the Shift button while pressing the keyboard's MSB or LSB key.
2.
Use the keyboard's numeric keys to enter the MSB or LSB (0-127).
3.
Press the keyboard's ENTER key to confirm your choice.
SENDING PROGRAM CHANGE MESSAGES:
Sends a MIDI message to change to a certain program number:
1. Hold the Shift button while pressing the keyboard's Program Change key.
2. Use the keyboard's numeric keys to enter the Program Change (0-127).
3. Press the keyboard's ENTER key to confirm your choice.
】
command to define the downward joystick message.
5