Smartpond 70781 Manuel D'utilisation page 9

When cleaning the filter use warm water only. Do not use any
chemicals that may destroy the beneficial bacteria.
Reassemble all part and place in water before reconecting to
the power source.
PUMP
Regular cleaning of the pump may be necessary depending
upon the environment which it is operated. Clean the pump
when it is visibly soiled or when a drop in performance is
detected. Follow maintenance steps 1-4 to access the pump.
Step 5. Remove the
impeller cover and the
impeller.
Step 6. Use a brush to
clean the impeller and the
inside of the pump housing
using warm water.
Step 7. Check parts for damages such as a cracked rotor,
magnet, or cover. Replace parts if necessary.
Step 8. Reassemble all pump parts and place in water before
reconnecting to the power source.
TROUBLESHOOTING
IF THE PUMP FAILS TO OPERATE:
• Check to make sure the power cord is plugged in and the pump is
getting power.
• Check the pump outlet and any tubing, fountains, spitters etc. for kinks
or obstructions.
• Remove the front cover and/or pump cover, and impeller cover to
expose the impeller. Turn the impeller to ensure that it is not broken or
jammed.
IF THE PERFORMANCE OF THE PUMP IS NOT SATISFACTORY
OR THE PUMP DOES NOT FLOW EVENLY:
• Check to make sure the pump is completely submerged in water
• Check to make sure the impeller and the impeller housing are clean.
• Adjust flow control.
For more information on product maintenance and
maintenance videos, visit www.smart-pond.com/
maintenance.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO LOWE'S: 1-888-755-4497
5
7