Amp: Amp Modeling - Korg Pandora PX5D Manuel D'utilisation

*: The sound will be muddy if you play chords. You should normally play only single notes when using this.
**: This is usually an effect for bass, but you can use it with the Synth amp model to produce a thick sound when using
a guitar.

AMP: Amp Modeling

When using Amp Modeling, the control dials (GAIN/MID, BASS, TREBLE, VOLUME) and Value encoder will be
active. The VOLUME dial can still be used even when Amp Modeling is "OFF." In order to take full advantage of the
characteristics of Amp Modeling, we recommend that you use it in conjunction with Cabinet Modeling when listening
through headphones or when recording from the line output.
If GSYNTH1–3 or BSYNTH1–3 is selected as the type, the control dials will control filter depth, filter decay, Oscillator
selection (setting), and synth level respectively (☞p.42).
BTQ CLN
Clean channel of a high-end 100 W hand made guitar amp.
Recommended CAB: 4x12CLS, 4x12VIN, 4x12MDN
BTQ OD
Overdrive channel of a high-end 100 W hand-made guitar amp.
Recommended CAB: 4x12CLS, 4x12VIN, 4x12MDN
TWD1X12
1x12" guitar combo covered in tweed cloth.
Recommended CAB: 1x12TWD
TWD4X10
4x10 guitar combo but designed for bass guitar.
Recommended CAB: 4x10TWD
BLK2X12
2x12 guitar combo indispensable for country or blues players.
Recommended CAB: 2x12BLK
AC15
VOX AC15 manufactured in 1962. Recommended CAB: 1x12VOX
AC15TB
Brilliant channel of a VOX AC15TB. Recommended CAB: 1x12VOX
TYPE (π/† CURSOR) VALUE (Value encoder & Control dial)
GAIN/MID
..... amount of distortion (0.0...10.0).
BASS ...... low frequency (0.0...10.0).
TREBLE
............... high frequency (0.0...10.0).
VOLUME
............... output volume (0.0...10.0).
Value encoder
................ mid frequency (0.0...10.0).
39