Product Description; Technical Details; Ambient Conditions; Operating Cycle - Marco 164 020 12 Mode D'emploi

Self-priming electric pump for the transfer of liquids of varied nature for discontinuous or
intermittent usage.
The pumping elements are made up of bronze gear drives which can possibly even run
dry for brief periods.
CODE TYPE
164 020 12
UP3/OIL
164 020 13
TEMPERATURE: min.-10°C 14°F-max.60°C 140°F RELATIVE HUMIDITY: max. 90 %
WARNING: the above indicated temperature ranges are applicable to all components
of the pump and these limits must be respected in order to avoid any possible
damage or malfunctioning.
The pump has been designed for discontinuous use. Under conditions of high operating
pressures (eg. with closed or blocked outlet, excessive length of the delivery circuit and/or
excessive pressure due to accessories), the pump can be subjected to elevated stresses
and overheating and therefore should not be used for prolonged periods under such
conditions.
There are numerous fields of applications for the pump, however only exclusively with
the allowed liquids mentioned:
- transfer of lubricating oil
- transfer of viscous liquids
- transfer of oils, antifreezing
- circulation of viscous liquids
- draining of engine sumps

PRODUCT DESCRIPTION

TECHNICAL DETAILS

VOLT FUSE
12 7,5 A
24 4 A

AMBIENT CONDITIONS

OPERATING CYCLE

APPLICATIONS
©
ø 6 mm ø 8 mm ø 13 mm WEIGHT
20 l/h 60 l/h 330 l/h
7
S.p.A.
E N G
A
B
PCS x CART.
1,4 kg 12
C
D
E