Master-Slave Mode; Cleaning And Maintenance; Replacing The Fuse - EuroLite Rampe LED 648/5 RGB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Group 2 – 24 channel occupancy; 4 sets of 2 LED groups.
Group 1 – 48 channel occupancy. Each LED group is controlled individually.

Master-Slave Mode

If 2 or more LED Fluter 648/5 RGB devices are connected together, first disconnect them from the DMX
signal. Set one or more devices on Sound Activation Mode (See No DMX Auto/Sound/Manual) and you have
Master-Slave Mode.

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
CH
CH
19-24
19-24
CH
CH
7-12
7-12
CH
CH
43-48
37-42
CH
CH
19-24
13-18
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
CH
CH
13-18
13-18
CH
CH
1-6
1-6
CH
CH
31-36
25-30
CH
CH
7-12
1-6
27/52
51913855_V_1_0.DOC

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Led bar 648/5 rgb

Table des Matières