Krushr F86/600 Guide De L'utilisateur page 13

open the door whilst compaction of the Main Collection Bin is in operation.
For your safety, should you open the door during this operation, this will halt
the procedure and a fast bleeping alarm will sound. Immediately close the
door to stop the alarm and allow the appliance to reset itself.
WARNING - DO NOT exceed the duty cycle of this appliance referred to in Initial
Set Up.
3. HYPERCRUSH MODE. This appliance is fitted with an enhanced
compaction facility called "hypercrush". This feature is designed to overcome
the memory effect in many recyclable materials which gives them a tendency to
gain their original shape following initial compaction. Using the hypercrush mode
at regular intervals will allow you to make maximum use of the capacity of the
main bin.
4. To use the hypercrush mode
press and hold the blue button for
three seconds before releasing. The
blue button will start flashing. Close
the main door. This operation delays
withdrawal of the compaction plate
from the Main Collection Bin leaving
the compacted material at maximum
compaction for one hour. After this
time the appliance automatically
resets itself for further use
To disengage the hypercrush mode pull the main door open by 1cm. It will not
open further whilst the compaction plate sits in the Main Collection Bin – DO
NOT TRY TO FORCE THE DOOR OPEN. The alarm will start bleeping – close the
13
UK/Fr