Speaker Connections; Trigger Connections - Monster Power Signature MPA 5150 Guide D'utilisation

SPEAKER CONNECTIONS

Speaker connections are labeled with the channel name as well as being color-coded.
RED
Positive +
BLACK Negative –
CAUTION
: When connecting speakers, all polarity markings must be followed exactly or damage can occur
to your MPA 5150 or other components.
CAUTION:
Never make audio connections when your MPA 5150 or other components are turned on and receiving
power. Connect your MPA 5150 to AC power as the last step to ensure damage will not occur.

TRIGGER CONNECTIONS

Trigger connections are a convenient way to turn on and turn off your MPA 5150 when you use your remote control
to turn on and turn off your receiver or preamplifier.
The MPA 5150 remote trigger input and output both use a 1/8"-to-1/8" mono mini cable. (Included.) For a receiver/
preamplifier that does not have a remote trigger out, a power transformer is included with the amplifiers. Refer to
the Specifications Page for more information.
The remote trigger IN works on 3-30V AC/DC and the remote trigger OUT is 12V DC.
20