Rack Mounting - Monster Power Signature MPA 5150 Guide D'utilisation

RACK MOUNTING

Your new MPA 5150 comes with front and rear rack mounting accessories for equipment rack mounting. The front
rack ears are separate from the unit and must be attached prior to rack mounting. Please follow these instructions
to securely mount your MPA 5150 into a rack unit, with weight support both front and back.
1.
Remove the 10 Allen screws (5 on each side) that secure the front outer trim plates of the amplifier and set them
aside. To avoid scratching the rack ears or faceplate, take care when removing the Allen screws.
8
Trim Plate Allen Screws
LEFT REAR CHANNEL LEFT CHANNEL
POWER ON POWER ON
LEFT REAR CHANNEL LEFT CHANNEL
FULL VOLUME FULL VOLUME
LEFT REAR CHANNEL LEFT CHANNEL
GAIN GAIN
CENTER CHANNEL RIGHT CHANNEL
POWER ON POWER ON
CENTER CHANNEL RIGHT CHANNEL
FULL VOLUME FULL VOLUME
CENTER CHANNEL RIGHT CHANNEL
GAIN GAIN
DISPLAY
BRIGHTNESS
POWER ON/OFF
FIVE CHANNEL REFERENCE POWER AMPLIFIER
RIGHT REAR CHANNEL
POWER ON
RIGHT REAR CHANNEL
FULL VOLUME
RIGHT REAR CHANNEL
GAIN
MPA5150
MONSTER HOME THEATRE MUSIC