Télécharger Imprimer la page

MULTILINE Sergeant RAL 9011 Notice De Montage page 2

Publicité

N. Verwijder de 4 kunststof doppen (1), draai de 4 zijdelingse schroeven aan
de onderzijde van het armatuur los en verwijder het armatuur.
D. Entfernen Sie die 4 Kunststoffkappen (1), drehen Sie die 4 Schrauben an
E. Remove the 4 synthetic caps (1), loosen the 4 screws at the bottom of the
luminaire and remove the mounting bases.
F.
de l'armature et enlevez l'armature.
N. Neem de voedingskabel en steek deze door het
voedingsgat van de beugel met klem(1),bevestig de
beide beugels op de gewenste plaats(2),en sluit de
bedrading aan op de lusterklem van de
beugel(3).L=bruin (of zwart) N=blauw,
D.
Stelle,Schliesen Sie die Verdrahtung auf die Klemme
L=braun(oder schwarz) N= blauw
E. Take the supply cable and run it through the
supply opening from the bracket with the terminal
block(1).Fix the two brackets on the disered location
Connect the wiring to the terminal block of the
bracket.L=brown(or black) N=blue,
F.
l'ouverture d'allimation de support avec un bornier(1)
L=brun(ou noir) N= bleu,
=geel/groen
=yellow/green.
=jaune/vert
1
2
3
1
2
1
1
2

Publicité

loading

Ce manuel est également adapté pour:

Sergeant ral 901635.04193-990535.04194-9910