Aqualytic TC Série Mode D'emploi page 12

Adjustment and operation
The „Up" key is used to increase the temperature
The „Down" key is used to decrease the temperature
Setting the temperature values
12
Detecting a power failure
indicate that the temperature in the oven can no longer be held at
Temperature control and accuracy
Test procedure
Trouble shooting
- The ambient temperature of the thermostatically controlled
- A certain circulation of air is necessary for the compressor to
Important
Other operation controls
On the front side of the temperature control unit there are
covered shock-proof sockets for the connection of BOD's
appliances or stirring apparates. The total load on the sockets
must not exceed 4,5 amps.
The thermostatically controlled oven and laboratory sockets are
The control unit is connected by means of a 4-pole plug on the
TC 140 G / TC 256 G_Aqua_1 04/2014
-
-
-
-