Selecting A Paired Audio Device; Operation - Mercedes-Benz Nav + 4 Notice D'utilisation

MBA_BA_book.book Seite 27 Mittwoch, 2. September 2009 1:30 13
3. If necessary, change the audio source:
Select Audio streaming.
4. Select Device visible.
The Universal Media Interface is
available for approx. 5 minutes to
®
establish a Bluetooth connection and
can be detected by the audio device.
®
5. Activate the Bluetooth function of
the audio device. (Please refer to the
audio device operating instructions.)
6. On the audio device, start the search
®
for other Bluetooth devices. (Please
refer to the audio device operating in-
structions.)
®
All available Bluetooth -capable de-
vices are shown.
7. Select UMI from the list of devices for
connection setup.
8. First enter the PIN for the audio device
you have chosen, then on the Univer-
sal Media Interface, and confirm with
OK.
®
The paired Bluetooth device that is
compatible with audio streaming is ac-
tivated by the operating system and
playback of the existing audio files is
started.
Notes
A maximum of 10 audio devices can be
paired with the Universal Media Inter-
face. If another audio device (an 11th de-
vice) is paired with the Universal Media
Interface, the first audio device that was
paired is deleted.
For correct setup of a Bluetooth
nection between the Universal Media In-
terface and an audio device, neither the
Universal Media Interface nor the selec-
ted audio device may be simultaneously
connected to another device via Blue-
®
tooth .

Selecting a paired audio device

1. Switch on the audio system and call up
the base menu "Disc". (Please refer to
the audio system operating instruc-
tions.)
2. With the CD menu active, first switch
to the AUX menu.
The last selected audio source is acti-
vated.
3. If necessary, change the audio source:
select Audio Streaming.
4. Enable the Bluetooth
paired audio device.
5. Select the desired audio device from
the list Connected devices.
The paired Bluetooth
compatible with audio streaming is ac-
tivated by the operating system and
playback of the existing audio files is
®
con-
started.

Operation

• Turn ymz when the main screen is sel-
ected.
• Slide mp when the main screen is sel-
ected or briefly press the % button.
The next track is played.
• Slide om when the main screen is sel-
ected or briefly press the $ button.
The previous track is repeated or the
track currently being played is repeated
if it has been played for more than ap-
prox. 5 seconds.
Audio streaming
®
function of the
®
device that is
27