my-PV AC THOR 9s Instructions De Montage page 15

TOP
To fix it to the wall bracket, the AC•THOR 9s is suspended in the wall bracket by the two long
slots on top and then fixed in place by locking it underneath (slide to the left).
Check the AC•THOR 9s is securely fixed!
When installing several devices side by side, a minimum distance of 10cm must be
observed!
Then the electrical connections can be made.
Do not immerse my-PV temperature sensor(s) directly in water. Use a thermowell!
TIP: For mains leads, use a cable duct with a depth of 60 mm.
The necessary cut-out measures 130 x 60 mm.
AC•THOR ® 9s Montageanleitung / Assembly Instructions, Version 200330
10cm
10cm
15