Bigben RR30 Mode D'emploi page 10

Using the alarm
Setting alarm time
1. Slide the AL1 / AL2 / AL1+2 switch on the left side of the unit to AL1 to set ALARM 1 time or to AL2
to set ALARM 2 time. The display will show ALARM 1 or ALARM 2 according to your selection.
2. Slide the BUZZER / AUTO / STANDBY / ON switch on left side of the alarm clock radio to BUZZER or AUTO.
Refer to "Waking to Buzzer, or Radio" for details.
3. Hold ALARM SET and press HOUR to adjust hour or press MINUTE to adjust minutes until the desired
alarm time is displayed for the selected alarm.
Checking alarm time
1. Slide the AL1 / AL2 / AL1+2 switch on the left side of the alarm clock radio to AL1 or AL2.
2. Hold down ALARM SET to view selected alarm time.
Selecting alarm options
Slide the AL1 / AL2 / AL1+2 switch on the left side of the unit to AL1 to activate ALARM 1, AL2 to
activate ALARM 2 or AL1+2 to activate both alarms.
Notes:
The alarm will not sound if the BUZZER / AUTO / STANDBY / ON switch is set to ON or STANDBY.
The alarm will not sound when the clock radio is disconnected from AC power and powered by the
backup battery only.
Waking up to a buzzer alarm
1. Slide the BUZZER / AUTO / STANDBY / ON switch to BUZZER for the buzzer alarm.
2. Set the alarm time. Refer to "setting alarm time" for details.
The alarm buzzer will sound at the preset alarm time.
Waking up to radio
1. Slide the BUZZER / AUTO / STANDBY / ON switch to AUTO.
2. Set the alarm time. Refer to "setting alarm time" for details.
3. Adjust the VOLUME control to a setting loud enough to wake you up at the preset time.
The radio will turn on at the preset alarm time.
Stopping an alarm
Press ALARM / SLEEP / STANDBY to stop the buzzer, or radio alarm. The alarm will sound again the next day
at the preset alarm time.
Deactivating alarms
Slide the BUZZER / AUTO / STANDBY / ON switch to STANDBY to deactivate all alarms.
Snooze
When the alarm sounds at the preset time, press SNOOZE to enter snooze mode. The alarm will sound
again after nine minutes.
10